Pinpointer MI-4

The MI-4 is a traditional pin pointer, designed to be used by all detectorists at an attractive price, the MI-4 has the same specifications as the MI-6, without the DEUS / ORX radio connection.

“XP quality at a competitive price” – said


    When operating, you can re-calibrate the pinpointer by briefly pressing the button while away from any metallic source.

    On mineralized ground and salt water, it is advised to re-calibrate while in contact with the ground.

    To obtain a precise target location, re-calibrate near to the object, the detection zone will now be reduced.

    Waterproof pinpointer to 6 meters


    • Front and 360 ° detection
    • 2 audio modes (Pitch/Pulse)
    • 6 programs and 3 levels of sensitivity
    • Speaker & vibrator and/or led deactivatable = very long autonomy
    • One button to control everything
    • Quick retune
    • Ergonomic design and rubber
    • Totally replaceable parts
    • Rotary holster and strap with stainless steel rings


    • Rechargeable lithium polymer battery
    • Radio frequency: 2.4 GHz/P: ~ 0.56 mW
    • Detection frequency: 12 kHz
    • Sensitivity: 3 levels + retune
    • Led/vibrator/audio: ON/OFF
    • Audio mode: PULSE or PITCH
    • Holster, strap and charging cable included
    • Waterproof to 6 meters
    • Dimensions: W: 24 cm – D: 3.8 cm
    • Weight: 170 gr
    • Temperature of use: – 5°C to + 40°C
    • Temperature allowed under load: 0°C to + 35°C
    • 2 years warranty
    • Made in France

    Technical Support Pinpointer MI-4

    User manual

    Advertising brochure